Adjusting The Armrest - Casualplay Avant Bedienungsanleitung

User Instructions
IMPORTANT: The Avant comes with the wheels detached. Before unfolding
the pushchair for the first time, fit the wheels.
Fitting the rear wheels
• Fit the rear wheels by pressing the central button (a) and inserting the axle into the hole
(b) of the rear wheel bearer (fig. 1). It will click when correctly in place. Check that the
wheel is secure and turns freely.
Fitting the front wheels
• Fit the wheel sets into the slots, pressing them upwards until they click into place.
Unfolding
(illustrations 3–5)
• Release the locking device on the left bar of the chassis (fig. 3).
• Unfold the pushchair by pulling the handlebar (fig. 4) upwards in a swift movement (fig.
5). The devices will click when locked into place.
Parking brake functioning
• The parking brake is situated on the upper right hand side of the handlebar and is
activated by pressing the lever downwards until you hear a click indicating that the
brake is on the pushchair (fig. 6).
• To take the brake off, press the lower button and the brake will be released automatically (fig. 7).
Fitting the seat
• Put the parking brake on.
• Insert the connectors into the corresponding side slots (fig. 8). They will click into place.
The child can now sit in the seat.
Fitting the armrest
• Insert the ends of the armrest into the front slots of the pushchair (fig. 9).
• To remove the armrest, press the buttons on the sides and pull the armrest upwards (fig. 10).

Adjusting the armrest

• Press the side buttons on the inside of the armrest, and pull the armrest backwards or
forwards to the required position (fig. 11).
• The armrest has a position while in use. It will click when correctly in place.
(illustration 1)
(illustration 2)
(illustrations 6–7)
(illustration 8)
(illustrations 9–10)
(illustration 11)
17