Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
The LED curtain must be installed in a professional and safe manner. Never block any escape routes with
the LED curtain!
(1) Connect the LED curtain's data cable to the socket SIGNAL OUT of the control unit.
(2) Attach the LED curtain via its Velcro loops to a truss element, e.g. EUROLITE Show Stand.
DMX512 connection/connection between fixtures
The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
Please note, the starting address depends upon which controller is being used.
Only use a DMX-cable and 3-pin XLR-plugs and connectors in order to connect the controller with the fixture
or one fixture with another.
Occupation of the XLR-connection:
16/20
00068713.DOC, Version 1.2
Werbung
Inhaltsverzeichnis
