Bosch KAD Serie Montage- Und Gebrauchsanleitung Seite 46

en
3. Press the adjustment button +.
The appliance is ready for the manual connection.
An animation is shown in the refrigerator
compartment display.
The appliance is ready for the manual connection for
as long as the animation is displayed.
4. The refrigerator has now set up its own WLAN
network with the network name "HomeConnect".
You can now access this network with your mobile
device.
5. Call up the WLAN settings in the settings menu of
the mobile device.
6. Connect the mobile device with the WLAN network
"HomeConnect".
Password: "HomeConnect"
It can take up to 60 seconds to establish the
connection.
7. After successfully connecting, open the Home
Connect app on the mobile device.
The app will search for the refrigerator.
8. As soon as the refrigerator has been found, enter the
network name "SSID" and the password "Key" of
your own home network (WLAN) into the
corresponding fields.
9. Confirm with the button Transfer to household
appliance.
If the connection is successful, "On" flashes in the
■
refrigerator compartment display.
You can now connect the refrigerator with the app.
If "OF" is shown in the refrigerator compartment
■
display, it was not possible to establish a
connection.
Check whether the refrigerator is located within
the range of the home network (WLAN).
Repeat the process.
Connecting your refrigerator to the Home Connect
app
1. Once the connection between the refrigerator and
the home network has been established, press
Options button and Alarm off/lock button at the
same time.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously. Button operation
is locked if only the Alarm off/lock button is pressed
for too long.
2. Keep pressing Options button until "PA" is shown in
the freezer compartment display and "OF" in the
refrigerator compartment display.
3. Press + adjustment button to connect the appliance
to the app.
An animation is shown in the refrigerator
compartment display.
As soon as the refrigerator and the app are
connected, the refrigerator compartment display
shows "On".
46
4. Open the app and wait until the refrigerator is
displayed.
Use Add to confirm the connection between the app
and the refrigerator.
If the refrigerator is not automatically displayed, click
on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
5. Follow the instructions in the app until the process is
complete.
The freezer compartment display shows "PA" and the
refrigerator compartment display "On".
The refrigerator has been connected to the app.
If the connection has failed, please check whether
the mobile device is connected to the home network
(WLAN).
Then try to establish the connection again.
If "Er" appears on the refrigerator compartment
display, reset the Home Connect settings.
Note
On reset, all Home Connect settings are reset.
Activating the cameras
If your refrigerator is connected to both your home
network (Wi-Fi) and the Home Connect app you can
activate the cameras:
1. Press the Options button and the Alarm off/lock
button simultaneously.
"Cn" is shown on the freezer compartment display.
Note
Press both buttons simultaneously. The button
Operation is locked if only the Alarm off/lock button
is pressed for an excessively long period.
2. Press the Options button repeatedly until "CA" is
shown in the freezer compartment display and "OF"
is shown in the refrigerator compartment display.
3. Press the Adjustment button +.
The refrigerator compartment display shows
"On".The cameras are activated.
Note
If the cameras are activated and the refrigerator
contents are interrogated frequently via the app, this will
result in increased data transfer.
Note
Uploading the photos takes up to three minutes.
Note
Various external factors in home networks and the
Internet can cause transmission problems and pictures
to be discarded. These have no effect on the
appliance's basic functions.
Deactivating the cameras:
1. Press the Options button and the Alarm off/lock
button simultaneously.
"Cn" is shown on the freezer compartment display.
Note
Press both buttons simultaneously. Button Operation
will be locked if the Alarm off/lock button alone
remains pressed for too long.