en
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
m
Caution
To prevent the self-test from
■
terminating, keep the appliance door
closed while the self-test program is
running.
As water or ice may be dispensed
■
during the test, keep a glass in the
dispenser unit while the self-test is
running.
1. Switch off the appliance and wait
5 minutes.
2. Switch the appliance on. If a warning
signal sounds, it will automatically
switch off as the self-test progresses.
3. Within the first 10 seconds after
switching on the appliance, hold down
the super button, Fig. "/2, for
3 to 5 seconds until an acoustic
signal sounds. Then immediately
close the door.
The self-test programme starts. While
the self-test is running, a long acoustic
signal sounds once and the controls
on the dispenser unit flash.
38
When the self-test has ended and an
acoustic signal
sounds twice, your appliance is in
■
working order.
sounds five times and the super
■
button flashes for 10 seconds, there is
a fault. An error code is indicated on
the temperature display 4. Inform
customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.