Building In - KKT KOLBE EBMS4503S Benutzerhandbuch

Installation

Building in

Do not hold or carry the appliance by the door
!
handle. The door handle cannot hold the weight
of the appliance and may break off.
• Carefully push the oven into the box, making sure that it
is in the centre.
• Open the door and fasten the oven with the screws that
were supplied.
• Fully insert the appliance and centre it.
525
Connection to the power supply system
!
Important information
• The appliance is equipped with a power cord whose
plug may only be connected to a properly installed
and grounded power outlet.
• The mains voltage indicated on the rating plate
must correspond to that of your home.
• A socket may only be installed by a qualified electri-
cian in accordance with the applicable regulations.
• If the plug is no longer accessible after installation,
an all-pole disconnector with a contact gap of
at least 3 mm must be installed.
52
• Do not kink the connecting cable.
• Screw the appliance into place.
• The gap between the worktop and the appliance must
not be closed by addtional battens.
• Do not trap or bend the power cable.
• Contact protection must be guaranteed by the installa-
tion.
• Do not use adapters, multiple sockets or
extension cables.
Overloading can lead to a fire hazard.