En English - Xylem YSI MultiLab 4010-1 Schnellstartanleitung

English
Overview
Keypad
4
Downloaded from www.Manualslib.com

EN English

MultiLab 4010(P)-1W
The MultiLab 4010(P)-1W meter enables you to perform measurements (pH,
conductivity, D.O.) quickly and reliably.
The MultiLab 4010(P)-1W meter provides a maximum degree of operating com-
fort, reliability and measuring certainty.
Keys are indicated by brackets <..>.
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec). A long keystroke (approx. 2 sec) is indicated by the underscore behind
the key symbol (e.g. <ENTER
<F1>:
F1 _
<F1 >:
<F2>:
_
F2
<F2 >:
<On/Off>:
<M>:
<CAL>:
_
<CAL >:
<STO>:
STO STO
_
<STO > :
<RCL>:
RCL _
<RCL >:
<><>:
<><>
<ENTER>:
_
<ENTER >:
<AR>:
AR AR
manuals search engine
_
>).
Situation dependent function (is shown on the display)
Switches the meter on or off
Selects the measured parameter
Calls up the calibration procedure
Displays the calibration data
Saves a measured value manually
Opens the menu for the automatic save function
Displays the manually stored measured values
Displays the automatically stored measured values
Menu control, navigation
Opens the menu for measurement settings / confirms entries
Opens the menu for system settings
Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
MultiLab 4010(P)-1W
ba76149y04 03/2018