En English - Xylem SI Analytics Lab 875 Bedienungsanleitungen

Lab 875
Overview
Keypad
F1
F2
STO STO
RCL
AR AR
ba77151y01 10/2015

EN English

Lab 875
The Lab 875 meter enables you to perform measurements (pH, conductivity,
D.O.) quickly and reliably.
The Lab 875 meter provides a maximum degree of operating comfort, reliability
and measuring certainty.
Keys are indicated by brackets <..>.
The key symbol (e.g. <ENTER>) generally indicates a short keystroke (under
2 sec). A long keystroke (approx. 2 sec) is indicated by the underscore behind
the key symbol (e.g. <ENTER
<F1>: Situation dependent function (is shown on the display)
_
<F1 >:
<F2>:
_
<F2 >:
<On/Off>: Switches the meter on or off
<M>: Selects the measured parameter
<CAL>: Calls up the calibration procedure
_
<CAL >: Displays the calibration data
<STO>: Saves a measured value manually
_
<STO > : Opens the menu for the automatic save function
<RCL>: Displays the manually stored measured values
_
<RCL >: Displays the automatically stored measured values
<><>: Menu control, navigation
<><>
<ENTER>: Opens the menu for measurement settings / confirms entries
_
<ENTER >: Opens the menu for system settings
<AR>: Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
_
>).
EN
English
5