12.4. Displaying captures on a television
You can play back the shots from your camera on a television set.
Switch off the camera and
television set.
Connect the TV cable sup-
plied to the USB socket on
the camera and the yellow
video socket and white audio
socket on the television set.
Switch the camera and tele-
vision set on.
Switch the camera to Playback mode and begin playback as
required.
If the television set does not detect the camera signal auto-
matically, switch to the appropriate video input on the televi-
sion set (usually by means of the CX button).
In the camera menu "SETTINGS", under the submenu
"TV-OUTPUT", you may be required to select between
PAL and NTSC.
Downloaded from
www.Manualslib.com
set
manuals search engine
DE
EN
FR
Audio
Video
NL
225 of 474