7. First steps
7.1. Switching on the camera
Press the ON/OFF button for 1 to 2 seconds to turn the cam-
era on.
The operating LED lights up red for a moment and the dis-
play comes on. The camera is then in operating mode.
PLEASE NOTE!
If the camera does not switch on, check if the batter-
ies are inserted correctly.
7.2. Switching off the camera
Press the ON/OFF button down for a little longer to switch
the camera off.
7.2.1. Energy-saving mode
If the camera is not used for 3 minutes, it switches off. You can
also set the automatic switch-off time to 1 minute or turn off this
function completely.
94 of 132