Showing Data On A Television; Troubleshooting; Maintenance And Care - Medion LIFE E49020 Bedienungsanleitung

8. Showing data on a television

 Switch the camera off.
 Connect the supplied TV cable with the video output on the camera and the
video input on a compatible television or another monitor.
 Switch on the camera again and switch on the AV channel on the television.
 The camera will now output the images to the television.

9. Troubleshooting

Use the following checklist if the camera does not function correctly. If the problem
persists, consult MEDION Service.
The camera will not switch on.
The batteries are not inserted correctly.
The batteries are dead. Insert new ones.
The battery compartment cover is not completely closed.
The image is blurred.
The camera was moved during the shot.
The subject was outside the camera's focal range.

10. Maintenance and care

Clean the housing, lens and display as follows:
Clean the camera housing using a soft, dry cloth.
Do not use thinners or detergents which contain oil. This could damage the camera.
When cleaning the lens and the display, start by removing the dust with a lens
brush. Then wipe the lens and display with a soft cloth. Do not apply any pressure to
the display and do not use hard objects to clean it.
Do not use strong cleaning agents for the housing and lens (if there is dirt that
cannot be removed, contact your dealer).
ES
DE
EN
51 of 54