7.3.1. Using the stabiliser
The stabiliser makes it possible to take better shots in poor light-
ing conditions. The risk of blurred photographs is thus reduced.
From the camera menu, select "STABILIZER" and activate
or deactivate the function here.
7.3.2. Using the flash
If there is insufficient light for the photo, the built-in flash can
provide the additional light required.
Press the flash button repeatedly to select the following flash
settings:
The flash only works in single shot and self-timer mode. It cannot
be used for photo sequences and video recordings.
Using the flash increases battery usage. If the battery is almost
flat, the flash requires a longer time for charging.
160 of 474
Downloaded from
www.Manualslib.com
AUTO FLASH: The flash is activated automatical-
ly when the shooting conditions require addition-
al lighting.
Flash is triggered before the actual flash; used to
prevent "red-eye" effect. The camera detects the
brightness of subjects and only flashes if necessary.
Flash always on
"Slow Sync": The flash is synchronised with slow
shutter speed.
Flash always off
manuals search engine