Standards Of Reference - Fiem MG 140/200 Betriebshandbuch

STANDARDS OF REFERENCE

This product conforms to the essential Electromagnetic and safety requirements foreseen by the following directives:
• 2014/35/UE (LVD)
• 2014/30/UE (EMC)
As projected in conformity to the prescriptions of the following Harmonized Rules:
• EN 55014-1:2006 + A1:2009 + A2:2011
• EN 55014-2: 2015
Conformity to the above requirements is attested by
The mark was introduced in 1995.
It is opportune to underline the following actions that can prejudge the conformity and moreover the product characteristics:
• incorrect electricity supply;
• incorrect installation or incorrect /improper use or not conforming to the instructions reported in the instruction book supplied with
machine;
• replacement of its components with those not approved or adopted by the manufacturer, or replacement effected by unauthorized
technical service.
WARNING: THIS EQUIPMENT MUST BE EARTHED
ATTENZIONE: QUESTA UNITA' DEVE ESSERE CONNESSA A TERRA
ATTENTION: CETTE UNITE' DOIT ETRE MISE' A LA TERRE
ACHTUNG: DIESES GERAT MUSS EINEN ERDUNGSANSCHLUSS HABEN.
ATENCION: ESTE EQUIPO DEBE ESTAR CONECTADO A UNA TOMA DE TIERRA.
APPARATET MA KUN TILKOPLES JORDET STIKKONTACT. APPARATEN SKALL
ANSLUTAS TILL JORDAT NATUKKAT. LAITE ON LITTETAVA SUKO-RASIAAN.
DECLARATION OF CONFORMITY To senses of the attachment I, D.Lgs. 17/2010/CE
Manufactured in the EU for:
THE MACHINE
MODEL
SERIAL NUMBER
IS MANUFACTURED AND SOLD IN CONFORMITY TO THE ESSENTIAL REQUIREMENTS OF HEALTH AND SAFETY
of D.M. 17 of 27 January 2010 – Attachement I (implementation of the Machinery Directive 2006/42/EC)
The metallic
all serial numbers, and product specifications are detailed on the plate.
THE FOLLOWING HARMONIZED RULES HAVE BEEN UTILIZED FOR THE CORRECT IMPLEMENTATION OF THE ESSENTIAL
REQUIREMENTS OF HEALTH AND SAFETY OF THE ATTACHEMENT I.
EN 55014-1:2006 + A1:2009 + A2:2011
EN 61000-3-3:2014
Guanzate
The Declarator
24
• EN 61000-3-3:2013
• EN 61000-3-2:2014
marking on the product;
Incubatrici F.I.E.M. S.r.l.
Via Galileo Galilei, 3 - 22070 Guanzate (Como) - Italia
D E C L A R E S
Incubator
MG 140/200 Rural
plate fixed on the machine is an integral part of the same;
EN 55014-2: 2015
EN 61000-3-3:2013
T H A T
MG 200/300 SUPER RURAL MG 320 Maxi Pro