Troubleshooting - Fakir CUISINIER Benutzerhandbuch

EN

Troubleshooting

Before you call Customer Service, check whether you can correct the problem/ fault
yourself. For this purpose, please see the "TROUBLESHOOTING" section. If you can not
resolve the problem/error, please call Customer Service: Before calling please make ready
the model name and product serial number. You can find this information on the TYPE
LABEL of your product. Help Line: (+90 212) 444 0 241.
Problem Probable Cause
Chamber is overfilled
The food
Temperature adjustment is high
overflows while
The cover may be required to be
cooking
open for this type of food.
Appliance is turned off.
LED Display is
There may be a problem with the
not working.
electric cable.
There may be a foreign object
between the appliance base and
Chamber
chamber.
does not heat
sufficiently. Chamber's bottom may be dirty.
Appliance may be faulty.
A smell of
This is normal.
plastic occurs
There is water
coming at the
Condensate chamber is full.
back of the
appliance.
There is no electric.
Irregular current may be flowing
through the electrical network.
Cooking There may be a foreign object
takes a between the chamber and
long time heating base
Chamber may not be placed
properly in the appliance
Heating base may be dirty.
There is pressure on the
The cover lock
appliance.
does not open
Cover lock is off.
Remedy
Adjust the filling amount
Adjust the temperature
Open the appliance cover.
Turn the appliance on.
Replace it from the authorized
service.
Remove the object.
Clean the bottom of the chamber.
Call customer service.
It will pass after a few uses.
Empty the condensate chamber.
Check the voltage on the electrical
network.
Check the current on the electrical
network.
Remove the foreign object
Place the chamber properly
Unplug the device, wait for it to
cool off. Clean the heating base.
Decrease the pressure.
Open the cover lock.
40