Fakir CUISINIER Benutzerhandbuch Seite 32

EN
recommended that you boil 1 litre of water for 20 minutes.
Plug the appliance to operate.
A beep sound will be heard and the led display will light up. Now the appliance is ready to
use.
3.1. Menu
MENÜ
Press the menu button to select the cooking program you will use. Each time you press
the menu button, one of the 20 different food programs will light up respectively. When the
desired program is on, the program is started by holding down the start key for 2 seconds.
3.2. Navigation buttons
Depending on the cooking program selected with the + and - direction keys, temperature,
pressure, step or time value can be changed.
3.3. Display Time Setting:
The time indicator on the display flashes when any of the + or - direction keys is kept
pressed. The current time can be set using the - and + direction keys. The operation will be
fixed if you wait for 3 seconds without any action.
3.4. Time / Pressure / Temperature / Pressure Reduction
Each time you press the key, one of the time, temperature, presssure or step values is lit.
Depending on the cooking program selected in the manual setting or cooking programs,
this button can be used to change the desired value between time, pressure, temperature,
step by using + and - direction keys.
NOTE!:
Each cooking program has its own setting time, pressure and temperature. You can
change one or some of them according to the selected cooking program. In some
programs, only time can be changed.
You can check cooking program from the factory settings table.
Pressure Reduction
Cooking starts when this sign is seen on the display. When cooking starts, the
sign changes to when the internal pressure increases. This sign means that there is
pressure inside the appliance.
To reduce the pressure in the appliance;
1. Cancel the cooking program by pressing the keep warm / cancel button.
32