Conditions Of Warranty; General Information - MasterCool 69789-220 Gebrauchsanleitung

CONDITIONS OF WARRANTY

This product is warranted against any defect in materials and/or construction for a period of 1
(one) year from the date of delivery. The warranty consists of free-of-charge replacement or
repair of defective component parts considered same by the Manufacturer.
Reference to the machine serial number must be included in any requests for spare parts. If
the serial number is not available, contact the manufacturer immediately with valid proof of
purchase (invoice or other valid fiscal document). This warranty does not cover defects arising
from normal wear, incorrect or improper installation, or phenomena not inherent to normal use
and operation of the product. The manufacturer guarantees the perfect suitability of the
materials used for packing, in terms both of composition and mechanical strength/resistance.
The guarantee does not cover breakdowns attributable to damage suffered during shipping or
warehousing or caused by the use of accessories not meeting manufacturer's specifications, or
to tampering with or repair of the product by unauthorized personnel. It is of utmost importance
that the crates containing the machine be carefully inspected, upon delivery, in the presence of
the shipping agent. We recommend performing inspection with extreme care, since damages
to the crates due to shocks or dropping are not always immediately visible thanks to the shock-
absorbing capacity of today's composite packing materials. The apparent integrity of the
packing materials does not exclude possible damage to the goods, despite the due care taken
by the manufacturer in packing them.
NOTE: Regarding the above, the Manufacturer reminds the Customer that according to
international and national laws and regulations in force the goods are shipped at the sole risk of
the latter and, unless otherwise specified in the confirmation of order phase, the goods are
shipped uninsured. The Manufacturer therefore declines any and all responsibility in merit of
CLAIMS for damages due to shipping, loading and unloading, and unpacking. A product for
which repair under guarantee is requested must be shipped to the manufacturer under the
customer's exclusive responsibility and at the customer's exclusive expense and risk. In order
to avoid damage during shipping for repairs, the manufacturer's original packing must always
be used. The manufacturer declines any and all responsibility for damage to vehicles on which
recovery/recycling and recharging are performed if said damage is the result of unskillful
handling by the operator or of failure to observe the basic safety rules set forth in the instruction
manual. This warranty replaces and excludes any other warranty or guarantee that the seller is
required to provide under law or contract and defines all the customer's rights in regard of faults
and defects and/or scarce quality in the products as purchased.
The warranty will expire automatically at the end of the twelve-month period or whenever even
one of the following occurs: failure to perform maintenance or erroneous maintenance
procedures, use of unsuitable lubricants and/or tracer fluids, inept or improper use, repairs
performed by unauthorized personnel and/or with non-original spare parts, damage caused by
shocks, fires, or other accidental events.

GENERAL INFORMATION

Machine identification information is printed on the data plate on the rear of the machine (see
Figures 1 and 2). Overall machine dimensions:
Height:
Depth:
Operating temperature 10/40°C
Like any equipment with moving parts, the machine inevitably produces noise. The
construction system, paneling, and special provisions adopted by the Manufacturer are such
that during work the average noise level of the machine is not in excess of 70 dB (A).
Downloaded from www.Manualslib.com
INSTRUCTIONS MANUAL
1030 mm Width:
630 mm Weight:
Storage temperature -25/49°C
manuals search engine
570 mm
70 kg
-6-