Assisted Procedure; Recovery And Recycling - MasterCool 69789-220 Gebrauchsanleitung

ASSISTED PROCEDURE

In the assisted procedure mode, all the operations can be performed singly to the exception of
the recovery/recycling phase, which is automatically followed by used oil discharge. The values
for the quantity of gas recovered, quantity of oil recovered, vacuum time, quantity of oil
reintegrated, and quantity of gas charged into the system are automatically printed at the end
of each single operation.
From the MAIN MENU:
Select ASSISTED PROCEDURE and press the ENTER key.
The following screen is displayed:
NOTES:
*
xy

RECOVERY AND RECYCLING

Press ENTER to confirm RECOVERY / RECYCLE. The following screen is displayed:
Press ENTER to confirm RECOVERY / RECYCLE. The following screen is displayed:
Key in the vehicle's licence plate using the ↓↑ arrows to move around the licence plate
number. Then press "ENTER" to confirm.
NOTE: The numerical keys include an alphabet similar to that for text messages, for example:
press "2" once to display "A", twice to display "B", three times for "C" and four time for "2".
The following screen is displayed:
Downloaded from www.Manualslib.com
AUTOMATIC PROCEDURE
<ASSISTED PROCEDURE>
DATA AND CONFIGURATION
MAINTENANCE
RECOVERY / RECYCLE
VACUUM
OIL
TRACER
FILLING
SYSTEM FLUSHING*
STATIC DIAGNOSIS*
CHANGE OIL TYPE
Only if the hardware is installed in the machine.
Default values extrapolated from a previous procedure.
<RECOVERY / RECYCLE>
PIPE EMPTYING
Enter licence plate
............
Premere ENTER
manuals search engine
INSTRUCTIONS MANUAL
xx.x kg
xy min
xy ml
xy ml
xy g
-15-