Cleaning And Maintenance - Beko HCA62620B Bedienungsanleitung

5

Cleaning and maintenance

5.1 Cleaning
• Particularly do not neglect to clean your hood
immediately after you have made frying.
• Use a soft cloth soaked with liquid detergent to
clean the outer surface of your hood.
• Never use abrasive or scratching materials for
cleaning.
• You may use the cleaning agents commercially
available for persistent grease etc. by follow-
ing the warnings on the product. In order not
the scratch the brushed steel body, wipe in the
same direction with the bush trace.
• Do not use cleaning agents containing hy-
drochloric acid, bleach or abrasive powders in
order to maintain the surface quality of your
product. Use a cloth dampened in soapy water
or special stainless steel cleaning spray for
stainless steel steel surfaces. Remove the pro-
tective foil on the appliance.
Caution! You may cause a fire if you
A
do not follow the instructions on
the cleaning and replacement of
the filters of your hood.
5.2 Fat filter
The hood is equipped with aluminium filter stop-
ping the particles of fat emitted in course of
cooking. To remove the filter, move the clamps in
the direction of arrows (Fig.7). The filter shall be
cleaned manually by its immersion into the water
with dish washing liquid for approx. 15 minutes,
under the temperature equal to 40-50ºC. After
15 minutes, wash and accurately rinse the filter.
The filter must be dry before its installation in
the hood. It is also possible to wash the filter in
the dish washing machines. In course of wash-
ing, the filter colour may change, which does not
influence its filtering characteristics. The failure
to clean the filter regularly reduces the hood
performance, and may cause the fire. The filter
shall be cleaned at least every 35 hours of hood
operation.
12 / EN
5.3 Coal filter
The hood may be equipped with the coal filter.
The coal filter is used when the hood is not con-
nected to ventilation duct only. The filter shall be
installed on the fan body, like it is shown in the
drawing (Fig.10). The coal filter shall be replaced
every 6 months.
C
Do not wash or regenerate the
coal filter.
1
2
1
2
Mark lter installation
Mark lter removal
Fig.10 Coal filter replacement
Hood / User Manual