Balluff BTL7-A5 M Serie Betriebsanleitung Seite 53

BTL7-A/C/E/G5 _ _ -M _ _ _ _ -H/W(8)-S32/S115/_ _ _
Magnetostrictive Linear Position Sensor – Rod Style
12
Type code
Interface:
A = Analog interface, voltage output 0...10 V
G = Analog interface, voltage output −10...10 V
C = Analog interface, current output 0...20 mA
E = Analog interface, current output 4...20 mA
Supply voltage:
5 = 10...30 V DC
Output gradient:
00 = Rising (e.g. C_00 = 0...20 mA); only with BTL7-C/E
10 = Rising + falling (e.g. A_10 = 10...0 V and 0...10 V); only with BTL7-A/G
70 = Falling (e.g. C_70 = 20...0 mA); only with BTL7-C/E
Nominal length (4-digit):
M0500 = Metric specification in mm, nominal length 500 mm (M0025...M7620)
Rod version, fastening:
H = Metric mounting thread M18×1.5, O-ring, rod diameter 10.2 mm
W = 3/4"-16UNF thread, O-ring, rod diameter 10.2 mm
H8 = Metric mounting thread M18×1.5, O-ring, rod diameter 8 mm
W8 = 3/4"-16UNF thread, O-ring, rod diameter 8 mm
Electrical connection:
S32 = 8-pin, M16 plug per IEC 130-9, axial
S115 = 8-pin, M12 plug, axial
KA05 = Cable, 5 m, axial (PUR)
K05 = Cable, 5 m, radial (PUR)
FA05 = Cable, 5 m, axial (PTFE)
F05 = Cable, 5 m, radial (PTFE)
www.balluff.com
BTL7 - E 5 0 0 - M0500 - H - S32
english 25