LGB 55027 Anleitung Seite 12

CV Description
51 Lights (front): switching command
assignment
52 Lights (rear): switching command
assignment
53 Voltage values for F1 and F2
54 Function assignment for F1
55 Special functions for F1
56 Function assignment for F2
57 Special functions for F2
58 Idle time at a stop with a change of
direction
59 Function assignment for switching
range
60 Load monitoring: max. degree of load
readjustment
61 Load monitoring: control speed
12
Range Notes
(128) 0 = Switch with light button,
1 – 16 = Switch with corresponding function button
x + 64 = on only in backwards direction of travel
x + 128 = on only in forwards direction of travel
(64) See CV 51
(32) 1 – 32
x + 64 = Only the voltage for Output F1 is set (full track
voltage at the other output).
x + 128 = Only the voltage for Output F2 is set (full track
voltage at the other output).
(1) See CV 51
(0) 0 = Continuous operation
1 – 15 = symmetrical blinking (base 0.25 sec)
x + 16 = Alternative blinking of F1 and F2
x + 64 = Impulse function, ex. for uncoupler
x + 128 or + 192 = asymmetrical blinking
(2) See CV 51
(0) See CV 55
0 – 255 (0) Only for analog operation
0.5 seconds times the function value
1 – 16 (8) = Number of the function button
1 – 15 (2) Large value = high degree of load readjustment
1 – 255 (60) Large value = slow load readjustment