Replacing The Carbon Filter; Maintenance - EINHELL NEW GENERATION NMK 3500 Bedienungsanleitung

Anleitung NMK 3500 SPK1:Anleitung NMK 3500 SPK1
GB

Replacing the carbon filter

1. Take out the filter frame (1)
2. Remove the filter fastener from the filter frame
3. Take the carbon filter out of the bag
4. Place the carbon filter in the filter frame
5. Fasten the filter with the filter fastener
6. Slide in the filter frame (1)
1
2 4
3
5

Maintenance

1. Always pull out the mains plug first to avoid an
electric shock or risk of fire.
2. Use only gentle cleaner and a soft cloth to clean
the filter and the housing. Never use aggressive
media, petrol, alcohol or thinner. Only fit the filter
back in place when thoroughly dry.
3. At the end of the season, please empty the water
16
03.11.2006
tank, roll up the power cable, clean the filter and
the housing, then fit the filter back in place when
dry, and pack the device back in the original box
for storage. Never place any heavy objects on the
device.
1
11:14 Uhr Seite 16