Rothenberger ROWELD P 630 W Bedienungsanleitung Seite 22

 Touch the
 Touch the
 The heater's default temperature must be entered via
 Touch the
 Switch the hydraulic pump on and then touch the
 Move the control lever (item 4) over to the right and simultaneously touch the upper button
20
Downloaded from www.Manualslib.com
button ("Settings") to display the
following page:
The time, date and language can be set up from here.
Pressure and temperature offsets as well as the
temperature controller hysteresis can also be set up
from here.
("Continue") button to display the
heater system's inputting screen page:
Danger of being burnt! The heater can reach
temperatures of up to 280°C!
this screen page.
Use the keypad that has been displayed on the screen
to enter the new default temperature and then touch
"RET" to confirm it. Touch the
to activate the heater. The relevant status indicator will
now light up.
("Continue") button to display the
hydraulic system's inputting screen page.
Touch the button ("Return") to return to the previous inputting screen page.
Note: Lock the pressure!
to activate the 'lock pressure' function.
Move the lever to the left or just touch the button to switch this function off.
manuals search engine
button afterwards
("Continue") button.
ENGLISH