Backlight Brightness; Idle Mode Timing; Retroiluminado De La Pantalla; Battery Maintenance - Baxtran UCS Serie Benutzerhandbuch

STN
High resolution digital crane scale
8-2. AUTO ZERO CONFIGURATION
AZ xx will appear on screen.
Press
10(10%FS), 20(20%FS), 50(50%FS).
Press
8-3. MANUAL ZERO CONFIGURATION
MZ xx will appear on screen.
Press
10(10%FS), 20(20%FS), 50(50%FS).
Press
8-4. BACKLIGHT OPTION
BL xx will appear on screen
Press
> Backlight Brightness can be set to: On(enable), oFF (disabled), 5(5sec), 15(15sec),
30(30sec), 60(60sec).
Press

9. BATTERY MAINTENANCE

To maximize battery life, please note the following battery maintenance guide.
> This crane scale is powered by a 3 AA 1.5V batteries.
> Battery house can be opened by screwing off 1 screws.
> Depending on backlight brightness and idle mode setting, battery works over 150 hours.
> In order to conserve battery life, enable Auto-Off and Idle Mode, dim backlight brightness.
> To obtain maximum service life, battery should be stored between -20ºC and +40ºC. Stored batteries should
be recharged every three months.
> When 3 batteries voltage is lower than 3.2V, crane scale will auto power-off itself. Please replace the dead
batteries with new ones.
Manual de usuario | Manuel d'usager | User's guide | Benutzerhandbuch
Downloaded from www.Manualslib.com
for change auto zero value between 0(oFF), 2(2%FS), 3(3%FS), 4(4%FS),
for confirm your selection and go to next menu.
for change manual zero value betwen 0(oFF), 2(2%FS), 3(3%FS), 4(4%FS),
for confirm your selection and return to main menu.
to change backlight power off time.
for confirm your selection and return to main menu.
manuals search engine
ENG
DE FR ES
21