Backlight Brightness; Idle Mode Timing; Retroiluminado De La Pantalla; Battery Maintenance - Baxtran UCS Bedienungsanleitung

STN
High resolution digital crane scale
8-2. AUTO ZERO CONFIGURATION
AZ xx will appear on screen.
Press for change auto zero value between 0(oFF), 2(2%FS), 3(3%FS), 4(4%FS),
10(10%FS), 20(20%FS), 50(50%FS).
Press for confirm your selection and go to next menu.
8-3. MANUAL ZERO CONFIGURATION
MZ xx will appear on screen.
Press for change manual zero value betwen 0(oFF), 2(2%FS), 3(3%FS), 4(4%FS),
10(10%FS), 20(20%FS), 50(50%FS).
Press for confirm your selection and return to main menu.
8-4. BACKLIGHT OPTION
BL xx will appear on screen
Press to change backlight power off time.
> Backlight Brightness can be set to: On(enable), oFF (disabled), 5(5sec), 15(15sec),
30(30sec), 60(60sec).
Press for confirm your selection and return to main menu.

9. BATTERY MAINTENANCE

To maximize battery life, please note the following battery maintenance guide.
> This crane scale is powered by a 3 AA 1.5V batteries.
> Battery house can be opened by screwing off 1 screws.
> Depending on backlight brightness and idle mode setting, battery works over 150 hours.
> In order to conserve battery life, enable Auto-Off and Idle Mode, dim backlight brightness.
> To obtain maximum service life, battery should be stored between -20ºC and +40ºC. Stored batteries should
be recharged every three months.
> When 3 batteries voltage is lower than 3.2V, crane scale will auto power-off itself. Please replace the dead
batteries with new ones.
Manual de usuario | Manuel d'usager | User's guide | Benutzerhandbuch
All manuals and user guides at all-guides.com
ENG
DE FR ES
21