Sauber RVC-124120.1 Gebrauchsanleitung Seite 27

Button
Standby / suspend
mode button
Recharge button
Spiral cleaning button
Forward button
Right-turn button
Left-turn button
Back button
Start /pause /confirm
button
Suction adjusting
Time setting
Wall-following
cleaning
Scheduling setting
Function information
1. When the appliance is working, press the button to enter into the standby mode
2. When the appliance is in standby mode, press this button to enter into the
suspend mode. Press again, back to standby mode.
Press this button to recharge automatically
Press this button to enter into spiral cleaning mode
1. Press and hold this button, the appliance will move forward and clean. Release
the button, the appliance will stop.
2. When setting the time and scheduling, press the button to increase hour or
minute.
1. Press and hold this button, the appliance will pivot clockwise and clean. Release
the button, the appliance will stop. Only press once, the appliance will rotate and
then stop.
2. When setting the time and scheduling, press the button to switch to minute.
Press and hold this button, the appliance will pivot anti-clockwise and clean.
Release the button, the appliance will stop. Only press once, the appliance will
rotate and then stop.
2. When setting the time and scheduling, press the button to switch to hour.
1. Press and hold this button, the appliance will turn around and move forward,
and clean. Release the button, the appliance will stop. Only press once, the
appliance will turn around and then stop.
2. When setting the time and scheduling, press the button to decrease hour or
minute.
1. When the appliance is in standby, press this button to enter into auto cleaning
mode.
2. When the appliance is working, press this button to stop and enter into standby
3. When setting the time and scheduling, press the button to confirm the setting.
Press this button the adjust suction between Standard (800Pa
(1300Pa ).
1. Press this button,
2. Press forward or back button to adjust hour;
3. Press right-turn button to switch to minute, and minute will flash;
4. Press forward or back button to adjust minute;
5. Press Start /pause /confirm button or time setting button to save them.
Press this button, the appliance will enter into wall-following cleaning mode.
1. Press this button,
2. Press forward or back button to adjust hour;
3. Press right-turn button to switch to minute, and minute will flash;
4. Press forward or back button to adjust minute;
5. Press Start /pause /confirm button or scheduling setting button to save them.
6. Upon receipt of the setting sent by remote control, the appliance will respond
with "DI DI DI" sound.
7. Press and hold Scheduling setting button to cancel the setting; "DI DI" sound will
and hour will flash in the display;
and hour will flash;
- 26 -
) and Powerful