Intended Use; General Safety Instructions; Use In Explosive Areas - SATA filter 100 prep Betriebsanleitung

Operating Manual SATA filter 100 / 101 / 103 prep
5.

Intended Use

The SATA filter 100/101/103 prep serve the purpose of compressed air
purification. They separate solid and liquid particles as well as partially
gaseous components from the compressed air streaming through the
filter.
6. Safety Instructions

6.1. General Safety Instructions

• Before using the filters, please read the safety and operating instruc-
tions completely and carefully. Safety instructions and specified steps
are mandatory.
• Keep all enclosed documents and pass on the filter together with
these documents only.
6.2. Filter Specific Safety Instructions
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Use, cleaning and maintenance by skilled personnel only!
• Never use the filter when it is damaged or when components are
missing!
• Check and, if necessary, repair the filter on a regular basis!
• Put filter out of operation immediately when it is damaged!
• Never carry out unauthorised or technical modifications on the filter!
• Use original SATA spare parts and accessories only!

6.3. Use In Explosive Areas

The filter is approved for the use in explosive areas classified as Ex-zone
1 and 2.
With regard to the concept, design and type of construction, the SATA
filters 100/101/103 prep comply with the basic safety requirements of the
Directive 2014/34/EU. The documentation required in accordance with Di-
rective 2014/34/EC, Appendix VIII, has been deposited for 10 years under
the document number 70023722 with the named body number 0123.
Warning! Attention!
Warning! Attention!
EN
67