Installation - Honeywell MN Serie Benutzerhandbuch

INSTALLATION

It is important that the installation instructions below are followed for successful installation of this
Local Air Conditioner. Please call Customer Support if you have any difficulties or queries
regarding these installation procedures.
1
4
Installation Kit:
1. Flange Fixture + Hole Cover
2. Exhaust Nozzle Adapter
3. Exhaust Hose Connector
Installation Steps:
1. Exhaust nozzle adapter, exhaust hose and exhaust hose connector are pre-assembled inside the
package.
Through an Open Window
2. Slide-in the exhaust nozzle to the pre-assembled hose, rotate the exhaust nozzle anti-clockwise,
until it is locked in place. (See Fig. 1).
Fig.1
2
x1
x1
(1 Piece)
(1 Piece)
(1 Piece)
EN
3
x1
5
4. Exhaust Hose
5. Exhaust Nozzle
=
3
x1
x1
(1 Piece)
(1 Piece)