Functional Test - C.M.A. GLORIA AL Bedienungsanleitung Für Den Benutzer

P
3.
reparation of the machine
The preparation of the machine and its installation must be carried out by qualified personnel.
i
Use of the machine without all the installation operations having been carried out by technical personnel
could damage it seriously.
T
4.
urning on the machine
• Press the main switch(14)
• Wait for possible automatic re-filling of water in the boiler;
• Wait a few seconds longer for the auto-test to be carried out;
• The machine is ready for use when the following message is displayed:
please wait for

functional test

Boiler pressure
1.0 bar
09:16 09-02-04 1
Hours
i
If the temperature is lower than 90° C (heating up phase), on the display appears
ming key in the ON position, the machine can be partially switched off (heating element and selections
disabled) by simultaneously pressing the keys
To put the machine back in service press again the keys simultaneously for 3 seconds.
G
5.
rinding and dosing coffee
Place the grinder-doser in a convenient place near the machine. Grinding and dosing of coffee must
take place in accordance with the instructions of the manufacturer of the grinder-doser. To achieve
good quality espresso coffee we suggest the following:
• Do not keep large amounts of coffee beans on hand Observe the expiry date indicated by the
producer.
• grind the volume of coffee based on use, place the amount the doser contains and if possible use
it before the end of the day;
• if possible, never buy coffee that is already ground as it expires quickly. If necessary, by it in small
vacuum-sealed packages.
Fill the filter with a dose of ground coffee (circa 6-7 gr.) and press it with the press. Attach the filter
holder to the dispensing group.
i
To prevent the seal wearing too soon clean the edge of the filter before engaging the filter holder on the
dispensing unit. Do not excessively tighten the filter holder to the dispensing group.
34
DISPLAY - ASD / DS
of the machine;
test result
- ok -
Boiler temperature
Programming
120°C P
Date
14
1 - Monday
2 - Tuesday
3 - Wednesday
Day of the
4 - Thursday
week
5 - Friday
6 - Saturday
7 - Sunday
for 3 seconds.
g
o
r
low
. With the program-