C.M.A. GLORIA AL Bedienungsanleitung Für Den Benutzer Seite 176

10.5 WATER SOFTENER REGENERATION programming
Programming of the automatic warning of water softener regeneration:
1) with the keys
2) press the MODE key
10.6 CUP HEATER programming
Temperature programming and activation of cup heater:
1) enter programming;
2) set the temperature with the keys
3) press the MODE key
The cup heater is deactivated if the set temperature is lower than 70°C.
10.7 LANGUAGE programming
Programming of the language displayed:
1) enter programming;
2) set the language with the keys
3) press the MODE key
10.8 DOSERS alarm
Control of the dosers alarm. The 4 data displayed are relevant to the brewing
groups. The first datum on the right is relevant to the first group on the right and
so on for the others.
R
11. esetting data to zero
11.1 Resetting of dosers alarm
1) Turn the programming switch to ON;
2) Use the MODE key
3) Press the key
4) Press the UP ARROW key
28
SAE - DISPLAY
set the water quantity (increments of 50 l.);
to move on to the next programming.
to move on to the next programming.
;
to move on to the next programming.
to scroll the menu until dosers alarm
to start the resetting;
for at least 3 seconds to confirm the zero setting.
;
r e g . s o f t e n e r
000000
C U P H E A T E R
80°C
language
English
doser alarm
000 000 000 000
ro g
g
ro
doser alarm
000 000 021 007
reset counting ?
press + 3 sec.
doser alarm
000 000 000 000