Drink Selection - C.M.A. GLORIA AL Bedienungsanleitung Für Den Benutzer

DS
10.

drink selection

10.1 Use
1) Insert the aspiration tube into the milk container;
2) For cappuccino, coffee and milk or milk with a shot of coffee, fill the filter with the dose
of ground coffee and press it with the coffee press;
3) Attach the filter holder to the dispenser assembly;
4) Place the cup under the filter holder;
5) Select the desired serving and wait for completion of milk and coffee (the latter only for
cappuccino, coffee and milk or milk with a shot of coffee).
To stop delivery ahead of time, press the selected key again.
i
If the dose consists of coffee and milk, press the selected key repeatedly until the cycle is com-
pletely interrupted. For manual delivery of warm milk, press the key
To interrupt dispensing of warm milk, press again the key
10.2 Programming coffee doses
Program the milk selections push button panel in the following way:
• Turn the programming key to the ON position (
• Hold the PROG key
panels come on);
10.2.1 Programming CAPPUCCINO and CAFFE LATTE
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder to the delivery group;
• Select the dose to be programmed (e.g. cappuccino);
• Wait for milk delivery;
• To confirm the dose of milk, press the cappuccino key again.
• Wait for coffee delivery;
• To confirm the dose of coffee, press the cappuccino key again.
i
The amount of cream can be modified with the regulator (A) located under the upper grille.
The sequence of delivery, be it first milk and then coffee or vice versa, is established in the machine
programming phase (see chapter 14 "Programming machine parameters").
38
DISPLAY - ASD / DS
Foamed
Cappuccino
Latte
Milk
P
down on the left push button panel for at least 5 seconds (all LED on the push button
Additional
Hot Milk
Hot Latte Auto Additional
Milk Macchiato Steamer Hot Milk
flashes on the display);
.
Additional
Hot Milk
.