Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Registration Server Setup.
One device must be designated as the Registration Server.
•
To designate this device as the registration server, enter a registration server password in the appropriate fields.
Do not designate a WX 15 as the registration server (except in test environments).
The registration server password authenticates the devices in a community, and should be different from the
administrator password.
•
If this device is not the registration server, enter the IP address and password of the current (or future) registration
server in the appropriate fields. This device will not process data until the registration server is configured.
•
If you select the option to delay the formation of reduction tunnels, this device will not reduce or assemble data from
other devices until you enable reduction tunnel formation in the Endpoints page of the Web console.
•
Click Next to continue.
Set the Time.
•
If your network uses an NTP server for device time settings, enter the IP address of the NTP server. Otherwise, enter
the current time, date, and local time zone for the device. If applicable, select the Daylight Savings checkbox.
•
Click Next to continue.
Specify Feature and Topology Settings.
The feature and topology settings ensure that device resources are used efficiently to reduce and assemble data.
•
Select Active Flow Pipelining (AFP) or AFP and Application Flow Acceleration if you want to use these features. Note that
˜
the WXC 500 requires AFP for optimum performance.
•
Choose the topology setting that best describes the device's relationship to the other WX devices in the community (Hub,
Spoke, or Mesh). For a Hub or Mesh device, select the range of devices in the community.
•
For the WXC 500 only, enter the sum of the speeds for all the outbound circuits on the adjacent router that carry traffic
from the WXC device to the WAN. If the speed is variable, enter the maximum speed (up to the Ethernet speed of the
WXC 500). The WAN circuit speed is advertised to the remote WXC devices as the maximum speed at which to access
this device.
•
Click Next to continue.
™
š
WX 50, WX 60, and WXC 500 QUICK START
Werbung
Inhaltsverzeichnis
