Restore Factory Settings - HomeMatic IP HmIP-WRCC2 Montage- Und Bedienungsanleitung

6x long red
flashing
1x orange and
1 x green
lighting (after
inserting
batteries)
8

Restore factory settings

The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the wall-mount remote
control, please proceed as follows:
• Once mounted, the push-button can easily be
pulled out of the mounting plate (E). To remove
the push-button (A) from the wall mounting
bracket, take hold of the sides of the push-button
and pull it out (see figure 12).
• Use a non-metallic object (e.g. a pen) to push the
batteries out of the bracket (F) through the small
openings (see figure 13).
• Re-insert the battery making sure that it is right
way around while pressing the system button
Device defec-
tive
Test display
Restore factory settings
Have a look at your
app for error mes-
sage or contact your
retailer.
Once the test
display has stopped,
you can continue.
45