Oven With Pre-Heat - Pelgrim PCM128RVS Anleitung

OPERATION

Oven with pre-heat

EN 16
2. Press the grill button.
The display reads ': 0' and the indicator light comes on.
3. Turn the control dial to set the time.
The display indicates the set time.
▷ You can set a maximum of 60 minutes. The display first
shows steps of 10 seconds. After a period of 5 minutes has
been set, the steps become 30 seconds.
4. Press the start button.
The microwave starts with the chosen settings; the
microwave light comes on, the turntable starts rotating and
the time in the display counts down.
▷ At the end, three beeps are given. The microwave switches off.
When using the oven function, it is advisable to pre-heat (except if
the temperature is 40 °C). The maximum pre-heating time is
30 minutes. If these 30 minutes of pre-heating are not followed by
the cooking of a meal, the oven indicator light will keep flashing
and the pre-heat temperature will be shown in the display. The
pre-heat will switch off automatically after 15 minutes.
1. Press the ZERO ON button if the display does not show anything.
A beep sounds and the display shows the current time or
': 0'. You can now use the microwave.
2. Press the oven button.
The display shows '180C' and the indicator light comes on.
▷ Press again (a number of times) on the oven button if you
wish to set a different temperature.
▷ You can select from the following temperatures: 180C, 190C,
200C, 210C, 220C, 40C, 100C, 110C, 120C, 130C, 140C,
150C, 160C, 170C.
3. Press the start button.
The microwave starts pre-heating; the display alternately
shows 'PrE -' and the pre-heat temperature and the oven
indicator light flashes.