Fault Causes And Remedies - Beem Star Elements W10.001 Bedienungsanleitung

Fault causes and remedies

Fault
The power indicator does
not light up after swit-
ching on.
The automatic circuit
breaker in the fuse box
trips.
Water runs out of the
appliance.
The coffee is dispensed
into the coffee jug very
slowly
Filter overflows.
The coffee is too weak.
Strong build-up of steam
during coffee brewing
NOTE
If you cannot resolve the problem with the steps described
►
above, please contact customer service.
BEEM - Elements of Lifestyle
Possible cause
Not plugged in.
No mains power.
Too many appliances con-
nected to the same power
circuit.
Appliance is defective
Too much water in the
water tank.
Drip-stop is blocked.
Appliance is scaled
Coffee jug not correctly
positioned
Filter bag is not properly
inserted.
Not enough coffee powder
used
Appliance excessively
scaled
Troubleshooting
Remedy
Insert the mains
plug.
Check the fuse/
socket.
Reduce the number
of appliances on the
power circuit.
Contact customer
service.
Do not overfill the
water tank.
Clean the drip-stop
Descale the appli-
ance.
Position the coffee
jug in the middle
under the filter com-
partment
Switch off the appli-
ance and insert the
filter bag correctly.
Fill coffee powder
for the desired
number of cups.
Descale the appli-
ance.
EN
51