Nordcap WASTE 240/1 Bedienungsanweisung Seite 10

IMPORTANT
ALL THE OPERATIONS INDICATED BELOW MUST BE PERFORMED IN RESPECT OF EXISTING SAFETY
REGULATIONS, BOTH FOR THE EQUIPMENT IN USE AND FOR THE OPERATING PROCEDURES.
WARNING
BEFORE BEGINNING HANDLING OPERATIONS ENSURE THAT THE LIFTING CAPACITY IS SUFFICIENT FOR
THE APPLIANCE IN QUESTION.
2.0 HANDLING
1.1 - HANDLING with FORK LIFT or SIMILAR
1.1.1 - Insert the forks into the side of back of the wooden pallet supplied with the appliance.
1.1.2 - Begin lifting checking that the appliance is in stable equilibrium.
WARNING
DURING HANDLING DO NOT TIP OR TURNOVER
WARNING
THE RESPECT OF THE RECOMMENDATIONS PRINTED ON THE OUTSIDE OF THE PACKING IS A GUARANTEE
OF A SOUND PHYSICAL AND OPERATING CONDITION OF THE APPLIANCE ALL TO THE ADVANTAGE OF THE
ENDUSER. THEREFORE THE FOLLOWING IS RECOMMENDED :
- HANDLE WITH CARE
- KEEP DRY
- STACKING OF OTHER OBJECTS ON THE APPLIANCE MUST BE ABSOLUTELY AVOIDED.
2.0 UNPACKING
2.1- Remove the corner protections (pieces of wood).
2.2 - Remove the protection on the top (piece of wood)
2.3 – The package on top of the cabinet contains shelves and shelve guides. Please take down this packages
before unpacking the cabinet.
2.4 - Lift the carton.
2.5 - Lift the appliance to separate it from the pallet.
2.6 - Place the appliance on the ground in its chosen position.
2.7 - Check for visible damage.
2.8 - Keep the packing out of the reach of children as it could be a danger hazard.
2.9 - Dispose of the packing to the specialized collection or recycling points ( respect existing regulations ).
10