Taking A Picture; Setting The Flash - Concord Eye-Q 4060 AF Kurzanleitung

INTERNAL MEMORY/INSERTING THE MEMORY CARD
The camera has 16MB internal memory that can be used right away. The camera can also use secure digital
(SD) memory cards (not included) to store images and video clips.
fig.1.1
1. Open the Battery/Memory Card door.
• Slide the door in the direction of the arrow marked on it, and lift it open. (fig.1.1)
2. Insert the memory card as indicated by the diagram. (fig.1.2)
• Please insert the card in straight, not on an angle.
3. Shut the Battery/Memory Card door by sliding it in the opposite direction of the arrow marked on it, and
close it securely. (fig.1.3)

TAKING A PICTURE

TAKING A PICTURE WITH THE VIEWFINDER OR LCD
fig.1.1
1. Turn the camera on.
2. Set the camera to (
Mode. (fig.1.1)
3. Frame the subject in the viewfinder or LCD.
4. Press the shutter button half-way to activate the auto-focus until the green AF LED lights up. (fig.1.2)
5. Press the shutter button fully to capture the image. (fig.1.3)

SETTING THE FLASH

A
AWB
1. Press the joystick
Downloaded from www.Manualslib.com
) Camera Mode and make sure the Macro Mode Switch is set to the (
4 M
28/45
N
07 ⁄ 04 ⁄ 03 02:40PM
toward ( ) repeatedly until the desired indicator appears on the LCD.
manuals search engine
fig.1.2
fig.1.2
A
AWB
AWB
⁄ ⁄
⁄ ⁄
4
GETTING STARTED / TICKING PICTURES
fig.1.3
fig.1.3
4 M
28 SEC
AWB
07 ⁄ 04 ⁄ 03 02:40PM
⁄ ⁄
) Distant
28/45
28
N
⁄ ⁄