Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note: The flash may need time to recharge between photos. While it is charging
the camera ready LED blinks. When it stops blinking you are ready to take
another picture. If the batteries are low, the flash will not work. Insert fresh
batteries.
TAKING IMAGES
1. Set the camera to Camera Mode by moving the Mode Switch
to
.
2. Position the subject in the viewfinder OR the LCD.
3. Gently press the Shutter button (fig.1.4) and keep the camera
still until the camera ready LED next to the viewfinder
flashes. (fig.1.5)
4. When the image has been captured, the camera ready LED
next to the viewfinder begins to blink. This indicates that
the image is being processed.
5. A preview of the image will be displayed on the LCD for 1
second after it is captured and the file counter number
displayed in the LCD will be updated.
Downloaded from
www.Manualslib.com
Flash Status
Auto (
)
A
Flash (
)
Flash Off (
)
manuals search engine
Distance from subject
3.9ft (1.2m) to 8.5ft (2.5m)
3.9ft (1.2m) to 8.5ft (2.5m)
3.9ft (1.2m) to infinity
3
fig.1.4
fig.1.5
Werbung
Inhaltsverzeichnis
