Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SLIDE SWITCH
The camera has a Slide Switch that has 3 image taking modes: macro (
portrait (
Slide Switch Position
Macro (
Portrait (
Distant (
Using the slide switch:
1. Position the Slide switch towards the macro (
or distant (
2. To ensure accurate focus, refer to the chart above to make sure
that the subject is within the distance range in the mode that
you selected. (fig.1.5)
TAKING STILL IMAGES
Taking Still Images:
1. Set the Mode switch to
2. Position the subject in the LCD or the viewfinder.
3. Gently press the Shutter button (fig.1.6) and keep the
camera still when the camera ready LED next to the
viewfinder is lit. This indicates that the image is being
captured. (fig.1.7)
4. When the image has been captured, the camera ready LED
next to the viewfinder will blink. This indicates that the
image is being stored in the memory. You may move the
camera at this time.
5. A preview of the image will be displayed on the LCD for 1
second and the file counter number displayed in the LCD
will be updated.
Downloaded from
www.Manualslib.com
) and distant (
). The current flash setting is displayed in the LCD.
Flash Status
)
Auto Flash (
)
Auto Flash (
)
No Flash (
) icon until the switch clicks into place.
manuals search engine
)
A
)
A
)
.
3
Distance from subject
2.2ft. (0.65m) to 4.7ft. (1.4m)
4.7ft. (1.4m) to 10.8ft. (3.2m)
4.7ft. (1.4m) to infinity
), portrait (
)
fig.1.5
fig.1.6
fig.1.7
),
Werbung
Inhaltsverzeichnis
