Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
VCE-108276.9
USE AND FUNCTION
Assembling vacuum cleaner
Note:
Always remove the power plug from the wall outlet before assembling
or removing accessories.
1. Attaching the flexible hose into the vacuum cleaner. Connect the
flexible hose into the air intake duct, push in until you hear a
2. Fitting the tube to the curved wand/hose extension. Push the
tube into the curved wand/hose extension.
3. Fitting the desired floor brush to the tube. Push the tube into the floor brush. Adjust the tube to the desired
length.
1) Brush A: This brush has two positions. One for hard and one for soft/textile surfaces. Choose the right
one.
2) Brush B: This brush is used for cleaning the animal hairs. Remember to keep the human hairs away from
the rotating brush.
Brush A
BUTTON FUNCTION INTRODUCTION
Note:
Once all attachments are in place, unwind a sufficient length of cable and insert the plug into the wall outlet. A
yellow mark on the power cord shows the ideal cable length. Do not pull the power cord beyond the red mark.
1. Insert the power plug into the wall outlet.
2. Press the power on/off button located on
3. To rewind the power cord, press the cord rewind button with one hand and guide the power cord with the
other hand to ensure that it does not whip causing damage or injury.
On/off button
Brush B
- 12 -
.
Dust barrel release button
Rewind button
Speed control button
EN
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
