Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Specifications; Especificaciones - JVC CH-X1500 Installationsanleitung

Vorschau ausblenden Andere Handbücher für CH-X1500:
Inhaltsverzeichnis

Werbung

Correct
Correcto
Correct
LOCATION OF CONTROLS
Ÿ
~
EJECT

TROUBLESHOOTING

• "RESET1–RESET8" or "R1–R8" appears on the display of the
connected receiver (or other equipment).
* Are the units connected correctly? After checking, press and
hold the 0EJECT button for a few seconds to reset this unit.
If the problem still persists, consult the JVC authorized dealer.
Indication
RESET1 (or R1)
RESET2 (or R2)
RESET3 (or R3)
RESET4 (or R4)
RESET5 (or R5)
RESET6 (or R6)
RESET7 (or R7)
RESET8 (or R8)
• Sounds are intermittent during play.
* Are the selectors on both sides adjusted correctly?

SPECIFICATIONS

CD CHANGER SECTION
Frequency response
: 5 Hz – 20 000 Hz
Dynamic range
: 99 dB
S/N ratio
: 103 dB
Distortion
: 0.005%
Wow & flutter
: Less than measurable limit
Output terminal
: Analog (8 pin x 1),
1.5 V (full scale)/less than 1 kΩ
GENERAL
Power requirement
Operating voltage
: DC 14.4 V (11 V – 16 V allowable)
Grounding system
: Negative ground
Allowable working temperature
: –10°C to +50°C (14°F to 122°F)
Dimensions (W x H x D) : 252 mm x 88 mm x 174 mm
(9-15/16" x 3-1/2" x 6-7/8")
Mass
: 2.3 kg (5.1lbs.) (excluding accessories)
Design and specifications are subject to change without notice.
If a kit is necessary for your car, consult your telephone directory
for the nearest car audio speciality shop.
http://www.jvcmobile.com
Technical Support & Customer Satisfaction Survey.
Downloaded from
www.Manualslib.com
OK
0° to +90°
0° a +90°
0° à +90°
UBICACION DE LOS CONTROLES
!
LOCALIZACION DE AVERIAS
• "RESET1–RESET8" o "R1–R8" aparece en la pantalla del
receptor (u otro equipo) conectado.
* ¿Están las unidades conectadas correctamente? Después,
pulse y mantenga pulsado el botón 0EJECT durante algunos
segundos para reposicionar la unidad.
Si el problema persiste, consulte con su concesionario JVC
autorizado.
Meaning
Ejection error
RESET1 (o R1)
Lifter error
RESET2 (o R2)
Tray error
RESET3 (o R3)
Pick up return error
RESET4 (o R4)
RESET5 (o R5)
Communication error
RESET6 (o R6)
Other errors
RESET7 (o R7)
Communication error
RESET8 (o R8)
• Los sonidos se interrumpen durante la reproducción.
* ¿Están los selectores de ambos lados ajustados
correctamente?

ESPECIFICACIONES

SECCION DEL CAMBIADOR DE CD
Respuesta de frecuencia
Gama dinámica
Relación S/R
Distorsión
Lloro y trémolo
Terminal de salida
GENERALIDADES
Alimentación
Tensión de funcionamiento : 14,4 V CC (11 V – 16 V permisible)
Sistema de puesta a masa : Masa negativa
Temperatura de trabajo permisible
Dimensiones (An x Al x Pr)
Peso
El diseño y las especificaciones están sujetos a cambio sin aviso
previo.
Si fuera necesario un juego de instalación para su automóvil,
consulte la guía telefónica para ubicar la tienda especialista en
audio para automóviles más cercana.
Visit us on-line for
US RESIDENTS ONLY
manuals search engine
Incorrect
Incorrecto
Incorrect
H
V
NO USE
~ 0EJECT button
Reset button: When pressing and holding for a few seconds
Ÿ CD magazine slot
! Door
~ Botón 0EJECT
Botón de reposición: Cuando se pulse y mantenga pulsado durante algunos segundos
Ÿ Ranura del magazín de CD
! Puerta
~ Touche 0 EJECT
Touche de réinitialisation: Quand elle est maintenue pressée pendant quelques secondes
Ÿ Compartiment du magasin CD
! Porte
Indicación
Significado
Error de expulsión
Error del alzador
Error de bandeja
Error de retorno del fonocaptor
Error de comunicación
Otros errores
Error de comunicación
: 5 Hz – 20 000 Hz
: 99 dB
: 103 dB
: 0,005%
: Inferior al límite medible
: Analógica (8 conectadores x 1),
1,5 V (escala total)/Menos de 1 kΩ
: –10°C a +50°C
: 252 mm x 88 mm x 174 mm
: 2,3 kg (excluyendo accesorios)
Having TROUBLE with operation?
USA ONLY
Call 1-800-252-5722
3
Over +90°
Más de +90°
Supérieur à +90°
EMPLACEMENT DES COMMANDES
EN CAS DE DIFFICULTÉS
• "RESET1–RESET8" ou "R1–R8" apparaît sur l'affichage de
l'autoradio connecté (ou d'un autre appareil).
* Les appareils sont-ils connectés correctement? Après l'avoir
vérifié, maintenez pressée la touche 0 EJECT pendant quelques
secondes pour réinitialiser cet appareil.
Si le problème persiste, consultez un revendeur JVC autorisé.
Indication
Signification
RESET1 (ou R1)
Erreur d'éjection
RESET2 (ou R2)
Erreur de poussoir
RESET3 (ou R3)
Erreur de plateau
RESET4 (ou R4)
Erreur provenant du capteur
RESET5 (ou R5)
RESET6 (ou R6)
Erreur de communication
RESET7 (ou R7)
Autres erreurs
RESET8 (ou R8)
Erreur de communication
• Le son est discontinu pendant la lecture.
* Les sélecteurs latéraux sont-ils ajustés correctement?
CARACTERISTIQUES TECHNIQUES
SECTION CHANGEUR DE CDS
Réponse en fréquence
: 5 Hz – 20 000 Hz
Gamme dynamique
: 99 dB
Rapport signal/bruit
: 103 dB
Distortion
: 0,005%
Pleurage et scintillement
: Inférieur à la limite mesurable
Borne de sortie
: Analogique (8 broches x 1),
1,5 V (pleine échelle)/inférieure
à 1 k Ω
GENERALES
Alimentation
Tension de fonctionnement
: CC 14,4 V (11 V – 16 V possible)
Système de mise à la masse : Masse négative
Température de fonctionnement admissible
: –10°C à +50°C
Dimensions (L x H x P)
: 252 mm x 88 mm x 174 mm
Masse
: 2,3 k g (sans les accessoires)
Présentation et caractéristiques modifiables sans préavis.
Si un kit est nécessaire pour votre voiture, consulter votre
annuaire téléphonique pour chercher le revendeur
d'accessoires audio pour automobile le plus proche.
Please reset your unit
Refer to "How to reset your unit"
Still having trouble??
http://www.jvc.com
We can help you!

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis