Function; Suitable Cookware - Silvercrest SDI 3500 A1 Bedienungsanleitung

Function

GB

Suitable cookware

26
Whilst standard hotplates heat up themselves, in an induction hotplate the heat is
created in the base of the cookware. The hob itself does not heat up; it becomes
hot when food is heated upon it in a pan and the heat from the pan refl ects onto
the hob. (Reverse heating).
This is caused by an energy fi eld that generates heat only in magnetically con-
ductive materials, for example, pans made of iron. In other materials, such as
porcelain, glass or ceramic, the energy fi eld cannot generate any heating eff ect.
Only use cookware that is suitable for induction hobs:
■ Suitable cookware consists of pots and pans with a base made of steel or
cast iron. You can identify these either by means of the markings on the pan
or by ascertaining whether a magnet clings to the base of the pan.
■ Unsuitable cookware is made from any kind of metal that is non-magnetic,
such as aluminium, copper and stainless steel, as well as non-metallic vessels
made of porcelain, glass, ceramic, plastics, etc.
■ Thin pan bases are better suited to induction cooking than thick sandwich
bases. The very short response times to setting modifi cations (short preheating
period, rapid and controllable browning) are not possiblewhen pans with
thick bases are used.
Only use cookware that is suitable for the size of the hob 1/2. This the only
way to ensure that the induction hob functions perfectly. The base of the pan
may not be uneven, rather, it must sit fl at.
The diameter may not be less than 16 cm to ensure that the energy fi eld has an
eff ect. Do not use pans with a diameter in excess of 26 cm.
SDI 3500 A1