Base Settings; Ringtone; Ringer Volume; Dial Mode - Topcom Butler 5710 Bedienungsanleitung

7

Base settings

7.1
You can choose from 9 different ringer melodies.
7.2
You can choose from 5 base ringer volume levels.
7.3
There are 2 types of dialling mode:
• DTMF/Tone dialling (most common used)
• Pulse dialling (for older installations)
To change the dialling mode:
7.4
Press the Flash key "R" (Key 4 - Picture 2C) to use certain services on your external line such as
"call waiting" (if your phone company offers this feature); or to transfer calls if you use a
telephone exchange (PABX). The Flash key "R" is a brief interruption of the line. You can set the
flash time to 100ms or 250ms.
Downloaded from www.Manualslib.com

Ringtone

1 Enter the menu.
2 Select "Base Settings" and confirm.
3 Select "Ringtone" and confirm.
4 Select the desired melody and confirm.
During scrolling a sample is played.
5 Return to standby.

Ringer Volume

1 Enter the menu.
2 Select "Base Settings" and confirm.
3 Select "Ringer Volume" and confirm.
The current setting is displayed.
4 Press the up key to increase the volume.
5 Press the down key to decrease the volume.
6 Select "Save" to confirm.
7 Return to standby.

Dial Mode

1 Enter the menu.
2 Select "Base Settings" and confirm.
3 Select "Dial mode" and confirm.
4 Select "Tone" or "Pulse" and select "Save".
5 Return to standby.

Recall (Flash)

1 Enter the menu.
2 Select "Base Settings" and confirm.
3 Select "Recall" and confirm.
manuals search engine
Base settings
14