Handset Name; Keypad Beeps; Setting The Contrast; Autotalk - Topcom Butler 5710 Bedienungsanleitung

6.2
You can change the name displayed on the handset during standby (max. 9 characters).
4 5 6
g h i j k l m n o
6.3
6.4
6.5
When there is an incoming call and the handset is on the base, the phone automatically takes the
line when lifted from the base. This function can be turned on or off.
6.6
It is possible to use your telephone with a prefix number. When dialling telephone numbers, you
can add automatically the prefix code before the number.
Downloaded from www.Manualslib.com

Handset name

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Handset name" and confirm.
4 Enter the name you want.
5 Press the soft menu key to correct.
6 Select "Save" to confirm.
7 Return to standby.

Keypad beeps

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Keypad beep" and confirm.
4 Select "On" or "Off" and confirm.
5 Return to standby.

Setting the contrast

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Contrast" and confirm.
4 Select the contrast you want (1-8) and confirm.
5 Return to standby.

Autotalk

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Autotalk" and confirm.
4 Select "On" or "Off" and confirm.
5 Return to standby.

Prefix code

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Prefix" and confirm.
4 Select "Edit" and confirm.
manuals search engine
Personalise the handset
12