Changing The Pin Code; Setting The Dialing Mode; Flash Time Duration - Topcom BUTLER E400 Gebrauchsanweisung

7.2
The base and each handset can ring with a different melody. To set the base melody:
7.3
Certain functions are only available to users who know the PIN code.
By default the PIN code is 0000. To change the PIN code:
4 5 6
GHI JKL MNO
4 5 6
GHI JKL MNO
4 5 6
GHI JKL MNO
7.4
There are two types of dialing mode: DTMF/Tone dialing (most common) and pulse dialing (for
older installations).
To change the dialing mode:
7.5
Press the flash key 'R' (key 7 - picture 2D Handset) to use certain services on your external line
such as "call waiting" (if your phone company offers this feature); or to transfer calls if you use a
telephone exchange (PABX). The Flash key 'R' is a brief interruption of the line. You can set the
flash time to 100ms or 250ms.
Downloaded from www.Manualslib.com
Choosing the ring melody
1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "BASE MELODY" and confirm.
4 Select a melody (1 to 5).
5 Confirm or return to the previous menu.

Changing the PIN code

1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "PIN CODE" and confirm.
4 Enter the old 4 figure PIN code and confirm.
5 Enter a new 4 figure PIN code and confirm.
6 Enter the new PIN code a second time and confirm.

Setting the dialing mode

1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "DIAL MODE" and confirm.
4 Select the dialing mode and confirm.

Flash time duration

1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "RECALL" and confirm.
4 Choose "RECALL1" for short flash time (100ms) or "RECALL2" for long
flash time (250ms) and confirm.
manuals search engine
Base settings
15