Software Operation
24(E)
Downloaded from
www.Manualslib.com
Density patch is recorded as shown in the figure below:
Film head
SDDS track
Film tail
Notes
• The number of frames in the time code will differ depending on the type
of the time code. Operation error may occur if the frame which does not
exist in the input time code is specified.
• When POP signal is selected, if signals similar to the POP signal are
detected within the specified duration, density patch is recorded in the
position that the first signal is detected.
About the visual ID
When recording digital audio signals, the system automatically records a
visual ID (as shown below) before and after the digital audio signals (i.e.,
after the header and before the footer).
Parameters set
with the System
Status menu
Parameters set
with the
Record/Setup
menu
Density measurement pattern
(selectable duration)
Recall Parameters button
Click to recall the parameters saved by clicking the Save Parameters
button below.
manuals search engine
White
Black
Analog track
Audio signal
Recording serial No.
Camera serial No.
Version number
Roll number
Film title
LED power values for
the P side and S side
" In the Line of Fire " Roll No. 03 Ver. 02 s/n10010 R-S/N000000A1
LED Power P=15, S=16
Visual ID
(one frame each)
Visual ID
Audio signal
Encoded digital
audio signals