Sony DFR-C3000 Handbuch Seite 14

About the SDDS Recorder System
DFR-E3000 Digital Film Sound Encoder
Input and output connector characteristics
12(E)
Downloaded from www.Manualslib.com
Power requirements
Power consumption
Operating temperature 5°C to 40°C (41°F to 104°F)
Operating humidity
Storage temperature
Mass
Dimensions (w/h/d)
Peak inrush current
Audio input/output
AES/EBU IN
SDIF-2 IN
AUDIO IN
manuals search engine
100-240 V AC, 50/60 Hz
200 VA
10% to 90% relative humidity
–20°C to +60°C (–4°F to +140°F)
13 kg (28 lb 11 oz)
424 × 132 × 451 mm
× 5 × 17
3 1 7
(16 / / / inches)
4 4 8
(1) Power ON, current probe method: 25 A (240
V), 10 A (100 V)
(2) Hot switching inrush current, measured in
accordance with European standard EN55103-
1: 7 A (230 V)
D-sub, 25-pin female
Sampling frequency: 44.056 kHz/44.1 kHz/
48 kHz (selectable by PC) (Includes sampling rate
converter)
Headroom: 20 dB/18 dB/16 dB (selectable by
PC)
Input audio format: AES/EBU (selectable by PC)
D-sub, 50-pin male
Sampling frequency: 44.056 kHz/44.1 kHz/
48 kHz (selectable by PC) (Includes sampling rate
converter)
Headroom: 20 dB/18 dB/16 dB (selectable by
PC)
Input audio format: SDIF-2 (selectable by PC)
D-sub, 25-pin female
Reference level: +4 dBu/0 dBu/–10 dBu
(selectable by PC)
Impedance: 10 kΩ minimum
Sampling frequency: 44.1 kHz
Frequency response: 20 Hz to 20 kHz ±1 dB
Dynamic range: 90 dB or more
Distortion: 0.07% or less
Crosstalk: –80 dB or less
Input signal: analog audio