Sony DFR-C3000 Handbuch Seite 11

Downloaded from www.Manualslib.com
4
Make sure that the indicator link hole can be seen at the center of the
panel hole and that the tension indicator can be seen in the indicator
link hole. If not, adjust the film by one, two, or three sprockets.
Verify that the indicator link hole is positioned in the center of the
panel hole and that the tension indicator is positioned in the center of
the indicator link hole. If not, turn the sprocket to advance the film
until it does.
5
Make sure the film is threaded correctly along the entire film path, and
that at no point does the film jut beyond the flange of any guide or
drum.
Correct:
Incorrect:
manuals search engine
Film
9(E)