Sony DFR-C3000 Handbuch Seite 15

Downloaded from www.Manualslib.com
AUDIO OUT
Reference
REFERENCE
VIDEO SYNC OUT
CAMERA SYNC
WORD SYNC
DFR-C3000 input/output
CAMERA OUT
CAMERA IN
Control
REMOTE I/O
TIME CODE
PC I/F (IEEE1284)
manuals search engine
D-sub, 25-pin male
Reference level: +4 dBu/0 dBu/–10 dBu
(selectable by PC)
Load impedance: 600 Ω
Sampling frequency: 44.1 kHz
Frequency response: 20 Hz to 20 kHz ±1 dB
Dynamic range: 90 dB or more
Distortion: 0.07% or less
Crosstalk: –80 dB or less
Output signal: analog audio
BNC-type ×2, loop-through
Impedance: 75 Ω (75Ω termination switch
attached)
Signal format: black burst or composite sync
Video system: NTSC, MONO, or PAL (auto
detection)
BNC-type
Impedance: 75 Ω
Signal format: composite sync
Video system: NTSC, MONO, or PAL (selectable
by PC)
BNC-type
Impedance: 75 Ω (4 Vp-p)
Signal format: composite sync
Video system: MONO
BNC-type
Impedance: 75 Ω
Level: TTL
Frequency: 44.056 kHz/44.1 kHz/48 kHz
(selectable by PC)
D-sub, 25-pin female
SDDS Camera data interface
D-sub, 9-pin female
SDDS Camera control interface
D-sub, 15-pin male
Optical isolated input and output
Output: 4 (motor start, motor stop, and two spare)
Input: 3 (spare)
XLR-type, female
Impedance: 10 kΩ or more
Signal format: SMPTE/EBU (auto detection)
D-sub, 25-pin female
IEEE1284-EPP compatible
13(E)