1 Using a screwdriver, lower the leveling foot until it rests on the floor.
2 If you need to lower the foot further, tighten the hex nut clockwise with
3 Repeat steps 1 and 2 for the remaining leveling feet.
4 Ensure that the rack is level.
Figure 1-11. Adjusting the Leveling Feet
1
3
Downloaded from
www.Manualslib.com
a 12-mm wrench (see Figure 1-11).
leveling foot stem
leveling pad
manuals search engine
1
2
hex nut
Installation Guide
2
3
23