Dell PowerEdge 4820 Installationsanleitung Seite 20

g
h
i
j
4 Reverse the bottom hinge body.
a
b
c
5 Rotate the front door 180 degrees so that its hinge-pin housings are on
the right side (see Figure 1-8).
18
Downloaded from www.Manualslib.com
Locate the top bolt holes in the right side of the rack, and fasten
the hinge body to the right side of the rack with the Allen bolts.
Insert the spring between the top and bottom hinge-pin holes in
the bottom hinge body.
Slide the hinge pin into the hinge body.
Insert the retention clip through the hinge so that the retention clip
is below the spring.
Remove the Allen bolts that secure the hinge body to the rack,
and place the bolts in a safe location.
Rotate the hinge body 180 degrees so that the hinge posts are now on
the other side of the hinge body (see Figure 1-7).
Locate the bottom bolt holes in the right side of the rack, and use
the Allen bolts to fasten the hinge body to the right side of the rack.
Installation Guide
manuals search engine