Recommended Tools And Supplies; Removing And Replacing The Rack Doors - Dell PowerEdge 4820 Installationsanleitung

Recommended Tools and Supplies

You may need the following tools and supplies to install the rack:
• #2 Phillips screwdriver
• Flat head screwdriver
• 12-mm wrench
• Needle-nose pliers
• 4-mm Allen wrench (if you want to reverse the direction that the front
door opens)
• Keys to the rack doors and side panels
• 13-mm wrench (for rack removal from pallet)
• 17-mm wrench (for rack removal from pallet)

Removing and Replacing the Rack Doors

WARNING:
never attempt to remove or install them by yourself.
WARNING:
accidentally injure someone.
Removing the Front Door
1 Pull the door latch and open the front door all the way (see Figure 1-1).
2 While holding the door, pull the hinge pin upward so that it clears the
door's hinge-pin housing (see Figure 1-1).
The hinge pin's retention clip prevents the hinge from being pulled out of
the hinge body.
8
Downloaded from www.Manualslib.com
Because of the size and weight of the rack cabinet doors,
When storing the doors, lay the doors flat so they cannot fall over and
Installation Guide
manuals search engine